University of Toronto Laser Safety Committee LSO Training Aug 28 – Sep 1, 2023 | Deadline: August 8, 2023

 Radiation Protection Service

This training meets the requirements for laser officer training of the American National Standard for Safe Use of Laser ANSI Z136.1-2022

The content of this training and the CV of the presenter were analyzed by the Board of Laser Safety. The Board of Laser Safety decided to award 4 CM points to all CLSO and CMSO participants in the course. In addition, the BLS has added this course to the list of pre-approved courses to meet the CLSO exam pre-requisite:

https://www.lasersafety.org/become-certified/eligibility#approved-training-courses

If you are a member of the University of Toronto, use your UTORid to register for the course at: https://ehs.utoronto.ca/training/my-ehs-training/ and look for course code EHS733.

If you are from outside the University or do not have an UTORid, please send an e-mail to gustavo.moriena@utoronto.ca

Course Details:

This is an annual 4-1/2 days course.

Dates: August 28 – September 1, 2023

Instructors: Dr. Gustavo Moriena, CLSO – Dr. Sandu Sonoc, CLSO

Location: Bahen Centre for Information Technology, 40 St. George Street, Toronto, ON, Room 2175
Course hours: 9:00 to 17:00 (lunch break included)

*Cost: $2500.00 +  13% HST (This course is free for U of T staff/students)

The training fee is non-refundable, but registrations can be transferred to another member of the same institution. If the University cancels the course, registrants will be fully refunded for the course fee. Invoices and payment instructions will be sent by email beginning two months before the start of the course.

*If you are affiliated with a university or hospital, please contact Gustavo Moriena for cost information.

Registration is currently closed.

---

The course will cover the following content:

1 – LIGHT

Course objectives
What is light?
Interaction of light with matter
Characteristics of light
Specular and diffuse reflection, refraction, scattering
Polarization
Energy per photon
Emission and absorption of light
Stimulated emission of radiation
LED

 2 – LASERS

Laser components: optical cavity, lasing medium, power source
Types of lasers
Radiometric units – source
Radiometric units – receiver
Point source – extended source
Nominal ocular hazard distance
Fundamentals of Q- switch
Mode patterns – mode locking

3 – LASER SAFETY PRINCIPLES

Retinal hazard region
Beam characteristics
Class 1, 1M and class 1 working environment
Class 2 and 2M
Class 3R
Class 3B
Class 4
Principles of health and safety: – Knowledge, the best defence; – Engineering controls; – Administrative and procedural controls
Administrative and procedural controls ANSI Z 136 requirements

4 – BEAM HAZARDS

Human eye anatomy
Eye-blink and aversion response
Light absorption in the human eye
Photopic and scotopic response
Negative effects dependency on: – Exposure time; – Wavelength
Thermal and photochemical effects
Corneal injury
Lens injury
Retinal injury
Skin anatomy
Skin injuries: – Thermal; – Photochemical
Medical surveillance

 5 – NON-BEAM HAZARDS

Electrical hazards
Physical hazards (cryogenics, radiation, gas cylinders, etc.)
Chemical Hazards
Laser Generated Air Contaminants (LGAC)
Fire
Biological hazards
Ergonomics and other factors

6 – LASER HAZARD CONTROL

Hazard assessment
Nominal Hazard Zone (NHZ)
Training as a hazard control
Engineering controls
Administrative controls
Entrance controls
Outdoor controls
Labels
Procedural controls
Personal Protective Equipment (PPE)
Example of SOP

7 – LASER HAZARD CALCULATIONS

Beam diameter
Beam divergence
Maximum Permissible Exposure (MPE)
Laser classification
Nominal Ocular Hazard Distance (NOHD)
Nominal Hazard Zone (NHZ)
Optical Density (OD)
Workshop useful calculations

8 – LASER ALIGNMENT AND MEASUREMENTS

Internal alignment
External alignment
General recommendations
Example of an alignment procedure
Limiting aperture for measurements
Laser power meter and detectors
Measurements procedures

9 – LASER SAFETY PROGRAM

Regulatory requirements
ANSI Z 136 series of standards
ANSI Z 136.1 – parent standard
Manufacturer standards
International standards
Responsibilities for the laser safety program
Laser registration
Controls and training
Inspections and audits of the program
Medical surveillance
Medical applications
Industrial applications
Role of the Ontario MOL

10 – LASER SAFETY OFFICER (LSO)

Who can be a LSO?
Authority of the LSO
Certified LSO
Duties of the LSO
LSO and the Laser Safety Committee
LSO Training
Role of LSO in training laser users
Behavioural laser safety – mentorship
LSO in: research, medical applications, industry, outside applications

11 – LASER ACCIDENTS AND LESSONS LEARNED

Causes of accidents
Accident analysis: root causes of accidents, direct causes of accidents
Most common accidents in laser applications
Lessons learned
Corrective actions
Changes to the program
Case studies
First response, emergency preparedness, CPR information
Accident reporting
Workshop accident analysis and emergency preparedness

12 – PRACTICAL LASER TRAINING

Aligning visible and invisible lasers
Stray beams
Using optical components (lens, mirrors, prisms, beam splitters, etc.)
Laser power measurements
Visit to a lasers lab in U of T

13 – Discussion

14 – Examination & Course Evaluation