Exposure In Industrial Radiography
Industrial Radiography

Exposure is done at the floor, in the center of each room and in the same source's vertical plane.
1- Point isotropic source was considered.
2- Build-up factors for gamma energies over 500 keV were calculated using Taylor's equation.
3- Build-up factors for gamma energies between 100 keV and 500 keV were calculated using Trubey's table.
Copyright © December 2009 University of Toronto
Not to be reproduced without the written permission of the Office of Environmental Health and Safety
215 Huron Street, Toronto, Ontario, Canada M5S 1A2
Hector Rocca